Call us on +44 (0)20 8291 6800

Email

AWNINGS, SUN CANOPIES, FITTINGS AND RAILS

NEW Khyam VANLITE ™ LED LIGHT PACK
NEW Khyam VANLITE ™ LED LIGHT PACK Khyam https://campervantastic.com/uploads/pics/products/big800/1a845e777c_324959C3-BF3A-48A2-B624-B61E63631149.jpeg 54.99 InStock 249620 Khyam VANLITE™ LED LIGHTING PACK Includes, remote control fob and connection box, switched and fused plug socket and wiring. LED lighting to fit under your sun canopy box or apply to Reimo rail or similar, fixes with 3m double sided tape fitted to the LED strip, just remove the backing and apply. Simply run the cable through the sun canopy box/tailgate and plug in to a standard 12 volt DC socket. Plug is fused, switchable and illuminated when on. Alternatively attach to an existing 12 volt light system supply. Please check with a qualified auto electrician if you have any concerns wiring directly in to your vehicles electric supply. For best results use the edge of the sun canopy box cover underneath to correctly fix in a straight line. VW Califonria - Sun Canopy box fitting. Open the sun canopy about half a metre, take care not to open any doors.  Release end caps with a screwdriver and place cable up and over the back, running cable behind the water seal for the tailgate.  No drilling required. Measure carefully to ensure correct length and cut surplus led light, approx 45cm from the end, ensuring you cut at the specific cut line these are indicated at stages through out the light strip, tape the cut end with insulation tape and fold so it sits inside of the end cap above the door (drivers door on a VW California). See photos for details.  Installation time 30-45 minutes depending on method.

NEW Khyam VANLITE ™ LED LIGHT PACK

£54.99 RRP £69.99
Quantity
Khyam VANLITE™ LED LIGHTING PACK

Includes, remote control fob and connection box, switched and fused plug socket and wiring.

LED lighting to fit under your sun canopy box or apply to Reimo rail or similar, fixes with 3m double sided tape fitted to the LED strip, just remove the backing and apply. Simply run the cable through the sun canopy box/tailgate and plug in to a standard 12 volt DC socket. Plug is fused, switchable and illuminated when on. Alternatively attach to an existing 12 volt light system supply. Please check with a qualified auto electrician if you have any concerns wiring directly in to your vehicles electric supply.

For best results use the edge of the sun canopy box cover underneath to correctly fix in a straight line.

VW Califonria - Sun Canopy box fitting. Open the sun canopy about half a metre, take care not to open any doors.  Release end caps with a screwdriver and place cable up and over the back, running cable behind the water seal for the tailgate.  No drilling required. Measure carefully to ensure correct length and cut surplus led light, approx 45cm from the end, ensuring you cut at the specific cut line these are indicated at stages through out the light strip, tape the cut end with insulation tape and fold so it sits inside of the end cap above the door (drivers door on a VW California). See photos for details. 


Installation time 30-45 minutes depending on method.